NuTone - AHS-200

Below are all the different types of NuTone. Select the device of your choice, to download the manual

Contents

Niilbne INSTALLATION INSTRUCTIONS READ amp SAVE THESE INSTRUCTIONS Automatic Heat Sensor MODEL AHS 200 For use with NuTone Attic Ventilators The Nulbne Model AHS 200 is a 200 F heat sensor and is intended to be installed in the attic and connected into the power line of a NuTone Attic Ventilator In the event the attic temperature surrounding the heat sensor reaches 200 F for any reason including fire the unit will interrupt power to the ventilator and then will be turned off 1 Located the heat sensor near the Attic Ventilator thermostat so that it is up roof from the ventilator and thermostat 2 Mount the heat sensor on the side of a roof rafter so that it s pointing down toward the living area of the home MODEL AHS 200 HEAT SENSOR ...