Hotpoint - RZM30

Below are all the different types of Hotpoint. Select the device of your choice, to download the manual

Contents

GETTING STARTED To ensure that your freezer runs reliably and efficiently follow these steps Choose a location for your freezer away from any heat sources and allow adequate ventilation 30mm 11 4 inch gap above Move the freezer into position using the sides of the cabinet Take care to avoid damaging the refrigerant circuit pipe work on the rear STEP 3 Level the freezer by adjusting the front feet This will stop rocking or vibration and keep the door aligned STEP 4 Before plugging in and switching on leave the freezer in its final location for at least 15 minutes to allow it to settle STEP 5 Plug in and switch on Allow the freezer to cool before placing food inside The high temperature light will stay on until the fre ...