Meade - TMB-130

Below are all the different types of Meade. Select the device of your choice, to download the manual

Contents

the shorter of the pair is the lock screw that holds the proper collimation after adjustment Be sure to adjust only one set of collimation screws at a time Loosen the lock screws before attempting to turn the collimating screws Make only small changes at a time turning the collimating screw only a fraction of a turn and checking to see the results before turning further When you finish adjusting the collimating screws be sure to snug down all lock screws to hold the correct colli mation Do not over tighten the lock screws but make sure they are firmly in place Once collimation is complete your objective lens will be on the same optical axis as the eye piece camera or CCD and you will obtain the best pos sible optical performance The other method o ...