Snapper - 6-1276

Below are all the different types of Snapper. Select the device of your choice, to download the manual

Contents

6 1276 DRIVEN DISC HUB REPLACEMENT KIT for SNAPPER WALK BEHIND MOWERS INTRODUCTION This kit is to be used on all SNAPPER 21 Steel Deck and Rear Discharge Aluminum Walk Behind Mowers This service repair kit is to be used in case of wear or damage to driven disc amp hub assembly WARNING STOP ENGINE DISCONNECT SPARK PLUG WIRE AND SECURE THE END AWAY FROM THE PLUG TO PREVENT PREMATURE ENGINE STARTING NOTE The rubber drive disc 2 3364 should be replaced when worn down to within 1 16 of the plate worn unevenly or if the rubber has been peeled Proceed as follows STEP 1 Remove clip and disconnect transfer rod from speed control lever and driven disc assembly See Figure 1 STEP 2 Unhook drive spring as shown in Figure 2 and remove the driven disc assem ...