Snapper - 6-1014

Below are all the different types of Snapper. Select the device of your choice, to download the manual

Contents

6 1014 REMOTE DEFLECTOR CONTROL for SNAPPER LARGE FRAME SNOW THROWERS INTRODUCTION This kit Is to be used on large frame snowthrowers to allow operation of the deflector from operators position INSTALLATION INSTRUCTIONS This kit requires a few tools open end wrenches amp drill Install as follows STEP 1 Remove control panel and Install control panel from kit Be sure all nut bolts and controls are tight STEP 2 Remove nut from engine base on right rear side as viewed from operators position Install cable bracket item 4 over stud and secure with nut See figure 1 STEP 3 Using the back of this instruction sheet as a template drill the two 1 4 holes into the right side as viewed from the operators position of chute STEP 4 Install cable mou ...