Winegard - RV-7012

Below are all the different types of Winegard. Select the device of your choice, to download the manual

Contents

STEP 5 Mount power supply in wall with screws provided and attach TV set cable to jack on front Connect band separator to VHF and UHF antenna terminals of TV set if required Press switch on front of outlet and check that light is on Figure 4 Cable OPERATION To receive cable signals from outdoor receptacle Press switch to OFF CABLE position Light on wall plate will go off showing that power is no longer connected to the antenna and that both TV sets are receiving signals from outdoor receptacle To receive signals from antenna Press switch to ON ANT position Light on wallplate will come on showing that power is connected to the antenna and both TV sets are receiving signals from the antenna NOTE Make sure the antenna is in the operating posi...