Banner - PL3-M

Below are all the different types of Banner. Select the device of your choice, to download the manual

Contents

PL3 M SYSTEMS plug logic DESCRIPTION The PL3 M is a complete modulated LED amplifier in a plug logic package it is intended for OEM use in systems already containing power supplies and solid state logic It may be powered by 12 to 18 VDC and has a switched logic level output 10 milliamps maximum that is high in the light state and low in the dark state It may be used with any of the LED scanners listed on pages 62 65 of the product catalog however range will be reduced by 50 in all cases Hookup is identical to that for M Series amplifiers except that pin 3 is used for sensitivity adjustment rather than for inhibiting SPECIFICATIONS Supply Voltage 12 to 18 volts DC at 75 milliamps nominal ripple must be less than 10 Output Short circuit ...