Omnimount - CCH-1

Below are all the different types of Omnimount. Select the device of your choice, to download the manual

Contents

Remove backing strip Rubber Pads 10 and press onto bottom of Foot Assembly and front edge of Shelf Thread Shelf Pegs 2 into holes on front edge of Shelf 1 Fig 19 Place CCH1 on top of TV with Shelf Pegs overlapping front edge of TV as shown in Fig 20 Loosen hex screw and slide Leg In or Out until Shelf sits level then secure Leg in position with hex wrench Note Maximum extension is shown in Fig 20 For additional minor adjustments thread Foot Assembly In or Out of Leg until Shelf sits level Tighten Lock Nut 7 against leg to hold level posi tion Proceed to section titled Mounting Components to CCH 1 Mounting Components to the CCH 1 The CCH 1 is the ideal companion for any home theater system and provides a conven ient mounting solutio ...