Stanton - RM-80

Below are all the different types of Stanton. Select the device of your choice, to download the manual

Contents

FADER CLEANING The RM 80 faders may need lubrication from time to time This will extend the fader life and eliminate any potential damage due to extended heavy usage Cleaning Instructions 1 Remove the fader and disconnect the cable coming from the mixer To remove the crossfader unsecrew the outer screws removing the 2 inner screws will detach the fader from the fader piate To remove the line faders remove all 4 screws 2 Spray a small amount of cleaner or lubricant into both ends of the fader and slide the fader back and forth a few times to spread the fluid evenly throughout the fader 3 Shake and wipe off excess fluid before re assembling the fader FADER REPLACEMENT To replace the cross or channel faders follow step 1 of the cleaning instructions ...