Bennett Marine - ES2000

Below are all the different types of Bennett Marine. Select the device of your choice, to download the manual

Click here to download the manual


EUROSTYLE ROCKER SWITCH CONTROL Part ES2000 INSTALLATION INSTRUCTIONS 1 Before you drill any holes read the entire instruction sheet 2 Unsnap the bezel from the control Using the bezel locate the position for the control at the helm Check carefully to make sure there are no obstructions behind the dashboard before drilling any holes 3 The bezel requires a footprint of 2 13 16 x 2 13 16 Cut a 2 1 2 hole in the center of the footprint using a hole saw 4 Pull the wire harness up through the hole and attach it to the back of the control with the ring terminals enclosed Please make sure that the gasket is in place with the flat side down before attaching wires to the control There are two screws for each wire The wire can be attached to ei ...