Attwood - 911639

Below are all the different types of Attwood. Select the device of your choice, to download the manual

Contents

dlttwcxxl stowaway Light Base 911339 2 Wire 911639 3 Wire Installation Instructions 1 Position the light base either on the bow for combination sidelights or the stern for ail round lights Be sure that the mounting surface is flat and that the selected area will accommodate the base dimensions 2 Using the template provided see Figure 2 locate the base center line parallel to the boat fore and aft center line and carefully mark the center installation hole and the three screw holes Drill 1 3 8 diameter hole being very careful not to crack or break the gelcoat finish around the edge of the hole Drill the three screw holes Ensure no burrs are left around 1 3 8 hole Attwood marine hardware navigational lighting bilge pumps and other marine acce ...