Attwood - 6511SS4

Below are all the different types of Attwood. Select the device of your choice, to download the manual

Contents

a attwood LED Underwater Lighting 6510 Series INSTALLATION INSTRUCTIONS 08 05 69433 Rev B REQUIRED FOR INSTALLATION Phillips head screwdriver Drill and bits 3 8 for wire clearance hole Pilot drill for mounting screws 1 8 Two 8 phillips head stainless steel screws not included 1 long LOCATION 1 Lights are designed to be submersible and are for under water use only Lights are intended for surface mount No large thru holes are required for installation 2 Using plastic light engine measure and mark location for 3 8 wire clearance hole NOTE Lights should be installed a minimum of 10 below the waterline DRILLING INSTRUCTIONS 1 Align light with the position you ve marked for the wire clearance hole Figure 1 2 Us ...