Ashly - MFA-8000

Below are all the different types of Ashly. Select the device of your choice, to download the manual

Contents

PA 8nnn TECHNICAL NOTES amp SPECIFICATIONS ARCHITECTS SPECIFICATIONS MFA 8000 The power amplifier being of two channels shall deliver a minimum power of 750 watts RMS per channel into 8 ohm loads and 1200 watts RMS per channel into 4 ohm loads or 1500 watts per channel into 2 ohm loads with both channels operating When switched into bridged mono mode the amplifier it shall deliver at least 2400 watts into an 8 ohm load The amplifier shall be immune to damage from shorted open or mis matched loads The amplifier shall have a gain of 38 dB per channel and an input sensitivity of 1 Volt RMS for full rated output Frequency response shall be 20Hz to 20kHz 2dB It shall be stable into any load including pure capacitors and inductors Hum and noise ...
Click here to download the manual

Contents