Grizzly - G1705

Below are all the different types of Grizzly. Select the device of your choice, to download the manual

Contents

G1705 amp G1794 Router Bit Spindle For The G1035 amp G1026 Shapers To install the router bit spindle proceed as follows 1 Remove existing spindle from the shaper by holding the top of the spindle with a wrench and remove the tie rod nut from the bottom of the spindle housing Figure 2 Pull the spindle out of the spindle cartridge Notice that the bottom portion of the spindle is identical to the bottom por tion of the router bit spindle Figure 1 Router Bit Spindle Unthread the tie rod from the spindle and completely thread into the bottom of the router bit spindle Place the router bit spindle into the spindle housing and line up the pin with the key way Figure 3 Tighten the tie rod nut to secure Use a back up wrench on the router bit s...