Dialogic - DM/F240-1T1-PCI

Below are all the different types of Dialogic. Select the device of your choice, to download the manual

Contents

Physical Description 1 RJ 48C Jack Connector to external digital telephone network interface 2 General Network Interface Alarm LED 3 Power LED 4 Reset LED 5 SWl Rotary switch to set board identification LINUX systems only 6 Alarm LEDs Indicate network alarms for trunk 1 CHI Red Indicates loss of signal Yellow Indicates loss of frame synchronization at far end of external network Green Indicates signal present powered up and receiving signal from external sources Loopback Indicates loopback mode is activated LEDs also indicate POST status 7 CT MVIP Bus Termination Jumpers Bus signal is terminated when the con esponding jumper clip is installed JP2A CT Bus termination jumper JP2B MVIP Bus termination jumper 8 P3 ...