Digi - EPC/CON-16

Below are all the different types of Digi. Select the device of your choice, to download the manual

Contents

Step Five Install peripheral cabling You can connect printers terminals modems or any other standard EIA 232 device to be controlled by applications on the computer to the EPC CON 16 concentrator by installing a cable between the peripheral and the concentrator On the peripheral end of the cable the cable connector depends on the requirements of the peripheral The EPC CON 16 or PORTS Xem mod ule end of the cable must fit either an RJ 45 or DB 25 connector depending on the model you have The pin assignments for each type of EPC CON 16 connector are as fol lows DB 25 Pin assignments Signal Description Pin GND Chassis Ground 1 TxD Transmitted Data 2 RxD Received Data 3 RTS Request To Send 4 CTS Clear To Send 5 DSR ...