Maytag - DC68-01052A

Below are all the different types of Maytag. Select the device of your choice, to download the manual

Contents

1 JPosition the uniton a level surface capable of supporting the entire weight of the dryer Remember that the unitwill be heavier when it is fully loaded Clean the surface where the stacking kit is going to be installed Place the mounting bracket on the Washer as indicated 2 Remove the 2 plastic covers shown in figure 6 attached to the middle of the stacking kit and save these for later use Remove the double back tape and firmly attach the stacking kit the top of the washer to assure the proper seal Make sure the word FRONT printed on the stacking kit is facing forward as shown above 5 Your Dryer is equipped with 4 leveling legs Make sure they are lowered 10 mm so there is a gap between the legs and the dryer base 3 Put back edge of st ...