Rolls - RM83T

Below are all the different types of Rolls. Select the device of your choice, to download the manual

Contents

OPERATION CONFIGURING THE 1 4 INPUT JACKS AS DIRECT OUTPUTS The eight 1 4 Input jacks come from the factory configured as line inputs and are electrically mixed with the XLR jacks They may be used together if desired To configure a channel s 1 4 jack as a Direct Out first remove the RM83T lid For each channel there are dual three pin headers with shorting jumper on two pins The setting from the factory is on IN By moving the shorting jumpers to the configuration shown as OUT one jumper up the other down the jack then becomes a Direct Output CONFIGURING THE 1 4 INPUT JACKS AS INSERTS To configure a channel s 1 4 jack as an Insert first remove the RM83T lid and locate the corresponding channel s dual three pin header Move both shorting Direct ...