Audiovox - CNPKEN1

Below are all the different types of Audiovox. Select the device of your choice, to download the manual

Contents

AUDIOVOX ELECTRONICS COUP Interface Cable Installation Guide Installation Step 1 Remove the head unit from your dashboard Important Depending on how your head unit was installed you may have to remove part or all of your dash board before the head unit can be pulled out You may also have to remove screws to complete this step Note Before proceeding make sure that the PIA Adapter has been pro grammed Refer to the PIA Installation Manual Professional installation is recommended Step 2 Connect the 34 pin cable connector to the Programmable Interface Adapter PIA mating connector as shown in Figure 1 Slide the rubber strain relief onto the PIA case Attach the Car Dock USB connector into the USB receptacle on the PIA Make sure the connector ...