Toyota - KIT #250-4221

Below are all the different types of Toyota. Select the device of your choice, to download the manual

Contents

KIT 250 4221 lATION PlTIO lUHOWAKK 1 Route Cable Assembly through vehicle s grommet on Driver s side next to Brake Booster into passenger compartment above ductwork so that a smooth curve is made and it does not interfere with any moving parts 2 Remove 2 M6 Bolts securing pedal assembly Install Bracket Cable using 2 M6 Bolts previously loosened 3 Remove the Snap In Adaptor from Cruise Control Kit 4 Remove the Adjustable Sleeve from the Cruise Control Module Cable and discard 5 Remove accelerator cable from accelerator pedal and place Bracket Throttle Lever on pedal Replace accelerator cable on pedal see Figure 1 FIGURE 1 6 Open white Bushing Cable and put it around Cable Assembly wire rope with flang end of Bushing Cable tow ...