Lynx - L-LS

Below are all the different types of Lynx. Select the device of your choice, to download the manual

Contents

eDART System User Guide Lynx Mold Closed Limit Switch L LS The Lynx L LS Mold Closed Limit Switch is a tie bar or machine mountable machine cycle input module designed to be used with the eDART System The L LS switch can be used to easily get a machine trigger off of most injection molding machines by following the installation steps below Always power down before working on any equipment Figure 25 Lynx Mold Closed Limit Switch side view L LS Installation Step 1 Switch the molding machine to Manual mode and close the mold Step 2 Set the limit switch on the tie bar as shown in figures 26 and 27 Be careful to note the position of the ejector plate the mold the limit switch and its cable so the limit switch and or its ca ...