Ken-A-Vision - T-2600

Below are all the different types of Ken-A-Vision. Select the device of your choice, to download the manual

Contents

screwdriver 1 5mm into hole on right side near the top of the base c Turn the stage plate lock screw one to two turns counter clockwise Carefully remove the stage plate the lamp holder for the bottom light source should now be in view and accessible d Gently pull up on the lamp to unclip the fuse type bulb from the holder Press the new lamp into place e Replace the stage plate Tighten the Stage Plate lock screw until snug Do not over tighten Replacement of Upper Light Source a Unplug the microscope from the wall outlet b With microscope facing you look on the right side of the upper light cover housing Locate the upper light housing lock screw and turn it counter clockwise Completely remove the screw c Pull down on the upper light cover to remo ...