TANDBERG - MPS800

Below are all the different types of TANDBERG. Select the device of your choice, to download the manual

Contents

TANDBERG MPS 800 Gateway Kit Installation Use the rear panel power switch to switch off the MPS power Insert the new Gateway board into the first available slot in the front panel Connect a LAN cable from the Ethernet socket of the board just installed and to your network Turn the MPS power back on The system is ready for configuration once the Power and the Active LED are green and the initial configuration menu appears on the LCD Send the MPS serial No to your TANDBERG Representative You will then receive the option key needed to activate the new boards Access the TANDBERG MPS by entering the IP address of the Gateway Board in a standard web browser to complete the configuration of the new Gateway Board and upload the new Gateway option ...