Ultralink - UL2-SA

Below are all the different types of Ultralink. Select the device of your choice, to download the manual

Contents

UltraLink 2 Quick Start Guide UL2 SA Single Access To Computer Switch 1 Power Option switch Switch 2 unit configuration switch Located on the side of all models SI and S2 Off for normal operation UL2 DA Dual Access To configure the UL 2 the default IP address 192 168 1 42 must be changed to be compatible with your network There are two different ways to configure the UltraLink 2 s network information using the USB ports or a network crossover cable Following explains both methods 1 Unit Configuration via USB ports The configuration procedure using USB connections is shown below Computer Requirements OS XP or Vista 2 USB 2 0 ports 1 Position Switch 2 on the UltraLink 2 to the ON position 2 Disconnect unit from the ne ...