Roland - PG-800

Below are all the different types of Roland. Select the device of your choice, to download the manual

Contents

B Roland PROGRAMMER Owner s Manual PANEL DESCRIPTtON Envelope Attack Knob CONNECTIONS AND OPERATION 1 Make sure that the synthesizer connected to the PG 800 is turned off 2 Connect the DIN Connector on the PG 800 to the Programmer Connector on the syn thesizer 3 Turn the synthesizer on Power is supplied from the synthesizer to the PG 800 4 Push the Manual Button then synthesize your own sound The PG 800 is a programmer that is design ed to control synthesizers therefore dose not output sounds by itself The PG 800 can edit the preset patches of the synthesizer When the synthesizer is switched on the Display may flash If so select other patch then assign the patch you wish to edit MEMORY The ...