Alvin - Onyx

Below are all the different types of Alvin. Select the device of your choice, to download the manual

Contents

To Assemble Unpack and inspect contents to confirm you have all the parts listed above Open base frame A in the upright position and place one height adjustment collar E on top of each leg tube as shown in figure 1 Position adjustment knobs facing out and tighten lower screws using a Phillips screwdriver Figure 1 Figure 2 Rear extension tube Front extension tube I Insert front and rear extension tubes B and C into base frame as shown in figure 1 For the time being set each tube at a height of approximately 4 and lock into place by tightening adjustment knob see figure 2 Adjustment knob Lower Phillips screw Place your drawing board tabletop on a soft pad or carpet to avoid scratches with the best side facing down Turn the ass ...