Bogen - KFLDS30T

Below are all the different types of Bogen. Select the device of your choice, to download the manual

Contents

KFLDS30T Wide Dispersion 30W Horn Loudspeaker Installation Instructions 1 Unscrew wing nut and remove threaded pin to separate the mounting base from the horn Use the base as a template for the mounting holes Drill three mounting holes and attach the base using appropriate hardware not included See Figure 1 IMPORTANT Make sure the base sits flat on the mounting surface Tightening the base down on an uneven surface could cause the base to fracture The speaker can be mounted to an I beam flange using Bogen s accessory BC1 Beam Clamp The slot in the base also allows strapping to be used as a means of mounting the horn use a strapping material capable of supporting the weight of the speaker and any external loads on the horn such as wind 2 Reassembl ...