Pelco - CA1750

Below are all the different types of Pelco. Select the device of your choice, to download the manual

Contents

CA1750 Mount Adapter Installation Instructions C209M 4 98 1 0 DESCRIPTION The CA1750 Mount Adapter is used when installing a bottom mount camera on a BS1750 CM1750 CM1750S orTB1750 mount only when the mount is attached to a ceiling Use of the adapter in this situation will allow the camera to be mounted in its correct orientation rather than being inverted 2 0 INSTALLATION To install the adapter refer to Figure 1 A CAUTION Be careful not to damage the cam era by screwing the adapter too far onto the threaded stud 4s soon as the stud threads appear through the adapter cap tive nut tighten the knurled nut 1 Place the camera inside the adapter and align the camera mount boss with the elongated hole in the adapter 2 Attach the ca ...