Grizzly - T24631

Below are all the different types of Grizzly. Select the device of your choice, to download the manual

Contents

MODEL T24631 8 SPIRAL CUTTERHEAD INSTALLATION INSTRUCTIONS For questions or help with this product contact Tech Support at 570 546 9663 or techsupport grizzly com Introduction The Model T24631 spiral cutterhead is designed to replace the straight knife cutterhead on the Model G0656 G0656P 8 Jointer It takes approximately one hour to install this cutterhead and re adjust the jointer The job con sists of 1 removing the old cutterhead 2 install ing shimming the new spiral cutterhead and 3 re adjusting the outfeed table to be even with the carbide inserts at TDC top dead center Note We strongly recommend replacing the old cutterhead bearings during installation Specifications Length 8 Diameter 3 Number of Spirals 4 Number of Ins ...