CyberData - SPA-9000

Below are all the different types of CyberData. Select the device of your choice, to download the manual

Contents

Setting Up the CyberData Speakers with Linksys SPA 9000 1 0 Setting Up the Linksys SPA 9000 To set up the Linksys SPA 9000 1 1 Run a Cat 5 cable from a POE Ethernet hub to the Internet port on the SPA 9000 1 2 Run a second Cat 5 cable from a PoE Ethernet hub to the Ethernet port on the SPA 9000 1 3 Plug in a computer laptop a Linksys phone and a CyberData speaker to the PoE Ethernet hub 1 4 Adjust the IP address of the computer laptop so that it is on the same network as the SPA 9000 192 168 0 X 1 5 Enter the IP address of SPA 9000 in a browser 192 168 0 1 admin voice advanced 1 6 Under Voice click on the SIP tab 1 7 In the PBX parameters section select WAN 1 8 Click on submit all changes 1 9 Click on the Router tab 1 10 Click on the WAN ...