Kenwood - KFC-W2510

Below are all the different types of Kenwood. Select the device of your choice, to download the manual

Contents

Installation 1 Place the supplied template on the panel and then mark the hole positions 2 Cut open a large hole and make screw holes 3 Peel off the covering sheet from the spacer and attach the spacer on the back of the speaker flange so that the flange is completely covered System connections First check the power of the amplifier If the power of the amplifier is higher than the subwoofer s rated input power increase the number of subwoofers so that the power fed to each subwoofer is lower than its rated input power or lower the sensitivity of the amplifier Supplying power greater than its rated input power of the subwoofer will cause noise and or breakage Also if using multiple subwoofers be careful about the total impedance Change the c ...