Digi - EIA-422

Below are all the different types of Digi. Select the device of your choice, to download the manual

Contents

EIA 422 Mode EtherLite 2 or 162 only To operate a port of the EtherLite 162 EIA 422 in EIA 422 mode set the port s EIA 422 ENABLED switch to the up position Set the TERMINA TION 422 ONLY switch to the down position This switch connects a 120 ohm 1 2 watt resistor across the input signals EtherLite 2 EIA 422 ports are hard wired to EIA 422 mode and have no termination installed Pinouts are shown in the table below Note 2 wire multidrop configuration for EIA 422 is not supported EIA 422 Pinouts Signal RJ 45 Pin Direction RTS 1 RxD 2 input DCD 3 RxD 4 input t TxD 5 output SG 6 TxD 7 output CTS 8 EIA 232 signals on EtherLite EIA 422 only EIA 485 Mode EtherLite 2 EIA 485 on ...