Maretron - VS-07.0HG

Below are all the different types of Maretron. Select the device of your choice, to download the manual

Contents

Maretron Vessel Monitoring amp Control Systems Installation Instructions VS 07 0HG Vacuum Switch Introduction The Maretron VS 07 0HG is a accessory for the SIM 100 Switch Indicator Module The VS 07 0HG has a set of normally open contacts that will close whenever a vacuum in excess of 7 0 Hg 3 4 PSI or 0 237 bar is detected The VS 07 0HG has a factory installed 8KQ end of line resistor so that the SIM100 can detect and report any break in the connecting wires Instructions Please follow these instructions to connect the VS 07 0HG to the NMEA 2000 network via a Maretron SIM100 Switch Indicator Module The wiring diagram appears in Figure 1 on the reverse side of this page The diagram shows a connection to channel 1 but connections to other channels are si ...