Scotts - 75345

Below are all the different types of Scotts. Select the device of your choice, to download the manual

Contents

AccuGreen2000 Hang Tag 3 28 01 11 01 AM Page 1 Calibration Your AccuGreen 2000 TM Spreader was calibrated at the factory You may check the calibration as follows 1 Adjust the micrometer setting to 6 2 Squeeze the trigger against the handle 3 The front edge of the shutoff bar should be aligned with the calibration line engraved on the bottom of the hopper 4 To adjust alignment use a small wrench to turn the black calibration screw at the lower end of the control wire leading from the micrometer insert Spend a few minutes on maintenance after each use 1 Never leave product in the spreader Pour leftover material back into the package and seal the package tightly 2 After each use wash thoroughly to remove all material clinging to the spr ...