Ashly - pne-c2

Below are all the different types of Ashly. Select the device of your choice, to download the manual

Contents

Ashly PE Amplifier PNE C2 Cobranet Module Field Installation 1 Remove the four screws from the standard input as shown 2 Carefully pull out the installed standard input assembly only as far as shown Note the ribbon cable shown furthest left that is labelled ST992 Gently remove this and the other two ribbon cables 3 The PNE C2 plugs are in the same general location as the three standard input plugs Plug in the cable ST992 first Be sure to fully seat each connector applying even pressure across the top Do not stress the wires 4 Gently guide the PNE C2 module back into the amplifier and fasten the four mounting screws www ashly com div container main d ...