Winegard - RP-RM46

Below are all the different types of Winegard. Select the device of your choice, to download the manual

Contents

WINEGARD TURRET REPLACEMENT KIT RP RM46 INSTALLATION INSTRUCTIONS for CRANK UP SATELLITE ANTENNAS Except Combination Mounts RM 4610 etc Directions for Turret Replacement 1 Crank antenna to vertical position 2 Remove crank assembly inside vehicle using 2 Phillips screw driver 3 Is there a nut in the center hole of the directional handle Remove this nut using a 9 16 socket wrench 4 Remove directional handle by pulling down Depending on the original instal lation it may be difficult to remove 5 To remove backup assembly from turret remove the two 2 clamps and four 4 screws Use 5 16 socket nut driver or wrench Do not pull on the wires attached to mount 6 Remove three 3 screws fastening turret to mount Use 5 16 soc ...