Wi-Ex - YX699

Below are all the different types of Wi-Ex. Select the device of your choice, to download the manual

Contents

zBoost YX699 Signal Meter Wi Ex Extending Cell Zones Preparing the YX699 Signal Meter for use Remove 3 screws from the back of the case to unsecure battery compartment remove the cover install 3 AA batteries replace cover and reinstall screws To measure signal strength 1 Attach the supplied rubber whip antenna to the connector at the top of the meter 2 Turn on the meter with the power switch on the side of the signal meter After a few seconds the meter will indicate the received signal strength on the display 3 Select the desired band by pressing the BAND button on the front of the meter The LED will light green for the CEL band 800 MHz or orange for the PCS band 1900 MHz Pressing the BAND button again will toggle the meter between the C ...